Polynomials where a Greater 1
Back to Course Home: Factoring Quadratics Using Lattice Multiplication
Introduction
In the previous unit, we learned how to factor ax2 + bx + c when a is equal to 1 using lattice multiplication. In this unit, we will now tackle factoring polynomials that have a value greater than one for a.
Activity #1
In this activity, we will refer back to the previous unit. Think about the steps you took in order to factor ax2 + bx + c when a was equal to 1. If you need to, refer back to Unit 2: Polynomials Where a = 1. How do those steps relate to the steps we need for this unit?
Make a conjecture and try it out using the problem below:
2x2 + 11x + 15
Were you able to find a relationship between the two processes?
What did you get for your final answer?
If you got, 2x2 + 11x + 15 = (2x + 5)(x + 3), then congratulations! You were able to use the process found in Unit 2 in order to solve the problem above!
If not, it's okay! Here is the work for this particular problem: Activity 1 Answer
In the next activity, we will go over this process step-by-step.
Activity #2
Let's look at the steps involved in solving the problem: 4x2 + 12x - 7
Step #1:
Just like in our Unit 2 exercises, we are going to first set up a 2 x 2 box for the same reasons. After you draw the box, place ax2 in the upper left hand box and your c value in the lower right hand box:
which equals
Step #2:
Next, we multiply the coefficient of our x2 term and our constant c. (Note: This was Step #3 in Unit 2) This step becomes extremely important throughout this unit. We multiply these two numbers together because both of the numbers involved directly affect how the numbers multiply and/or add together to get each term. That gives us 4 x -7 = -28 where 28 is the number we must find the factors of. Let's make a list of factors of 28:
As of this moment, all of our steps are the same as in Unit 2.
Step #3:
Now we look at the relationship between the a*c term and the b term. The a*c term is a -28 which means that one of the numbers that multiplied to get -28 had to be negative and the other had to be positive. The sum of these two numbers had to equal a positive 12. Therefore, the larger factor in each pair must be the positive number to get a positive 12. Negate all of your factors in the left column and add the two columns together in order to find your factors.
Therefore, -2 and 14 are our factors.
Step #4:
Now we rewrite the equation as 4x2 - 2x + 14x - 7. This demonstrates that we can now fill in our last two boxes with a -2x and a 14x. It does not matter which box you place each of these numbers. Therefore, I will place the -2x in the upper right hand corner and the 14x in the bottom left hand corner, like this:
Step #5:
Next, we look at each individual column and row and find the Greatest Common Factor of these columns and rows. This is where students will have their greatest difficulty within this unit. When a = 1, many of the GCFs were much more clear. Now the students really have to look at each of the two numbers involved to make sure they do not make any mistakes. After finding each GCF, place the GCF either above it's respective column or to the right of its respective row, just like in lattice multiplication. If any x term has a negative sign in front of it, take the negative sign as well.
I wanted to show you this particular example because of this step in general. In this particular problem, finding the GCF can be even more difficult. Notice that in the right column, -2 and -7's GCF is -1. Many students will say "there is no GCF" or that the GCF is 1. Therefore, when teaching this part of the course, you must bring an example like this to their attention because they will not know exactly what to do in this particular case. In addition, in the bottom row, students will want to say it is a -7 because the GCF is 7. Remind them that the rule states you only take a negative when it is touching the highest x value in the group.
Step #6:
Write the factors exactly how you see them both above and to the right of the rows. Therefore, you get 4x2 + 12x - 7 = (2x - 1)(2x + 7).
Notice: the steps were exactly the same no matter if a is equal to 1 or greater than 1! This is because in Unit 2, we introduced the idea of multiplying our a term by our c term. Since we introduced it in the steps originally, the students will already become accustomed to performing this step in the process. Now, this step becomes more evident in why we need it in order to factor polynomials.
Activity #3
In this activity, we are going to do another extended activity assignment. The document below has the four questions you should work on for this particular activity. Once you have finished, check you answers with the answer key.
Assignment: Extending Activity
Answer Key: Activity 3
Activity #4
In this activity, you will complete a survey that states how you feel on the information so far. Please right click on the link below and open it in a new tab.
Congratulations, you have now completed Unit 3! You now only have 1 more unit in the course to complete!
To continue on to Unit 4: Difference of Perfect Squares
To go back to Home Page: Factoring Quadratics Using Lattice Multiplication
References
Fullerton School District. Factoring Quadratics Part 2. [Document]. Retrieved from http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&ved=0CE8QFjAG&url=http%3A%2F%2Ffsd.k12.ca.us%2Fmenus%2FEdSvcs%2FExCEL%2FExCEL_Lessons%2FAlgebra%2FFactoring_Quadratics_Part2_Algebra.doc&ei=mPDDUIKzKIHV0gH50YGIDg&usg=AFQjCNGRUBNc5d7areJ4YfQkBdSa_XVTJg, November 2012.
Kitt and Leitze. (2000). Using Homemade Algebra Tiles to Develop Algebra and Prealgebra Concepts. Retrieved from http://mathforum.org/kb/servlet/JiveServlet/download/157-1629543-6202516-475281/algebra%20tiles.pdf, November 2012.
Neps and Rollman. (2011). The Life & Times of Chuckles the Rocket Dog: A Companionable Guide to Polynomials & Quadratics. Arbor Center for Teaching, Page 124 - 127. November 2012.


