Difference between revisions of "Introduction to 3D Printing"

From KNILT
Line 1: Line 1:
[[ETAP 623 Spring 2015 taught by Byrne]]|
+
[[ETAP 623 Spring 2015 taught by Byrne]]
  
  
 
== '''Overview and Purpose''' ==
 
== '''Overview and Purpose''' ==
  
 
+
Welcome to the exciting world of 3D Printing! This course will provide an overview on the technology of 3D printing, offer case studies on how it is being used and will off an opportunity to look into the future. Students will not only learn about the technology, they will create their own object to be 3D Printed!
  
 
=='''Needs Assessment'''==
 
=='''Needs Assessment'''==
  
 
+
This course is designed to take someone with no previous experience with Digital Design for 3D Printing and bring them up to speed on the technology.
  
 
== '''Performance Objectives''' ==
 
== '''Performance Objectives''' ==
  
 +
By taking this course, you will learn:
  
 +
1. How a 3D Printer works
 +
2. Safety and proper operation
 +
3. What a 3D Printer is used for and how it might be used in the future
 +
4. How to create a basic digital design for 3D Printing
  
 
== '''Course Units''' ==
 
== '''Course Units''' ==
Line 18: Line 23:
 
This mini-course includes the following units. Click the title of a unit to go to its page.  
 
This mini-course includes the following units. Click the title of a unit to go to its page.  
  
[[Unit 1: xxx]]
+
Lesson 1
 
 
Brief overview
 
 
 
[[Unit 2: xxx]]
 
  
Brief Overview
+
Lesson 2
  
[[Unit 3: xxx]]
+
Lesson 3
  
Brief Overview
+
Lesson 4
 
...
 
...
  
 
==Extended Resources==
 
==Extended Resources==
 
...
 
...

Revision as of 09:09, 18 November 2015

ETAP 623 Spring 2015 taught by Byrne


Overview and Purpose

Welcome to the exciting world of 3D Printing! This course will provide an overview on the technology of 3D printing, offer case studies on how it is being used and will off an opportunity to look into the future. Students will not only learn about the technology, they will create their own object to be 3D Printed!

Needs Assessment

This course is designed to take someone with no previous experience with Digital Design for 3D Printing and bring them up to speed on the technology.

Performance Objectives

By taking this course, you will learn:

1. How a 3D Printer works 2. Safety and proper operation 3. What a 3D Printer is used for and how it might be used in the future 4. How to create a basic digital design for 3D Printing

Course Units

This mini-course includes the following units. Click the title of a unit to go to its page.

Lesson 1

Lesson 2

Lesson 3

Lesson 4 ...

Extended Resources

...